jeffdeq Posted November 10, 2021 at 05:49 AM Report Share Posted November 10, 2021 at 05:49 AM (edited) A “toad” is a vehicle with four wheels on the ground, towed with a tow-bar behind an RV motorhome. I am prepping my 2018 Fusion Energi for just this task. The first step is to remove the front bumper/facia assembly and then install the front tow-bar base plate. While the bumper was off I was able to see why I only had a functional low note horn. It was because there never was a high note horn installed on the assembly line. (SMH) The low note horn is found on the drivers side behind the end of the metal impact bumper. The high note should be found behind the end of the right side end of the metal impact bumper. The horns are only accessible with the bumper off the car. I purchased the correct high note horn last week and installed it today. The wire was located at the end of the bumper with the correct plug. Edited November 10, 2021 at 05:50 AM by jeffdeq jj2me 1 Quote Link to comment Share on other sites More sharing options...
rv987 Posted November 30, 2021 at 01:15 PM Report Share Posted November 30, 2021 at 01:15 PM It looks like you have a roadmaster baseplate. Does it fit the Energi? I was told neither Roadmaster nor BlueOx had a badeplate for the Energi (aka plug-in Fusion). Quote Link to comment Share on other sites More sharing options...
jeffdeq Posted October 3, 2022 at 01:44 AM Author Report Share Posted October 3, 2022 at 01:44 AM I have now towed this 2018 Fusion Energi for more than 4000 miles without issue. I used all Roadmaster parts from eTrailer with the exception of the braking system. For that I used the Demco Stay N Play Duo with wireless monitor. You were given incorrect information. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.