dima235 Posted May 1, 2019 at 08:02 PM Report Share Posted May 1, 2019 at 08:02 PM Hello everybody! I got 2016 Fusion from Auction. The car was wrecked on the left side (left fender and both doors). All electrical stuff is OK. Tried to start it, but it didn't. With my diagnostic tool I figured that hybrid battery has only 294V. I am not sure if this is a problem or not. Below all codes I found:- P0B37 High voltage service disconnect or open- U0401 Invalid data received from ECU- U0415 invalid data received from ABS (wheel is off with knuckle)- U019F Lost communication with engine coolant pump- B1193 Crash event storage full and locked- P1A10 Hybrid Powertrain module - Battery disabled How can I charge hybrid battery in this car or how car I force the engine to start? Quote Link to comment Share on other sites More sharing options...
murphy Posted May 1, 2019 at 08:32 PM Report Share Posted May 1, 2019 at 08:32 PM Is it an Energi or a Hybrid? An Energi can be charged from the wall using the EVSE that should be in the trunk below the cover. A Hybrid will need help from a dealer. If memory serves it is a 350 volt battery so it's not discharged. The engine in either case is started by the high voltage battery. The 12 volt battery must also be in good shape to connect the HVB to the car . You have to find and repair the link the first responders cut to safe the car. The high voltage disconnect is behind the right rear seat back. The rear seat backs fold down. Starting the car does not involve starting the engine. If the car is on there will be a green icon in the lower right corner of the dash display. Be careful, High voltage DC can kill you quickly. Unlike AC you can't let go if you get across DC. One hand behind your back at all times when near high voltage DC. Quote Link to comment Share on other sites More sharing options...
dima235 Posted May 2, 2019 at 03:11 PM Author Report Share Posted May 2, 2019 at 03:11 PM Good morning! It's Energy and when I connect wall charger nothing happen, probably because I have code P1A10 (battery disabled).I will try to clear accident data first and try it again. Quote Link to comment Share on other sites More sharing options...
jsamp Posted May 3, 2019 at 04:16 AM Report Share Posted May 3, 2019 at 04:16 AM You are a brave soul to pick up a wrecked Energi at an auction. My guess is you will need to re-connect the disconnect to fix P0B37 as well as clear the crash data B1193. The others may fix themselves with that. No guarantees though. Quote Link to comment Share on other sites More sharing options...
dima235 Posted May 9, 2019 at 04:30 PM Author Report Share Posted May 9, 2019 at 04:30 PM started the car. Just disconnect and connect high voltage disconnect. Thank you for advise.Now need to figure all other code ). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.