openair Posted June 15, 2017 at 06:01 PM Report Share Posted June 15, 2017 at 06:01 PM (edited) This morning, while the vehicle was still warming up the ice, the vehicle showed zero bars in both the empower and enlighten displays. However my foot was on the accelerator and the vehicle was at least maintaining speed so I switched over to engage which showed one bar of white. At about 1.8 bars of white (power from the ice) all three displays show 1.8 bars. Does anyone else experience this? You'll likely need the ice still warming up for it to run at only 1 bar on the engage display. I've also had issues with the empower display not updating or lagging behind when the ice shuts off. Edited June 15, 2017 at 06:30 PM by openair Quote Link to comment Share on other sites More sharing options...
openair Posted June 15, 2017 at 10:31 PM Author Report Share Posted June 15, 2017 at 10:31 PM (edited) There seems to be varying or no correlation between the empower and engage displays. Sometimes empower shows more bars. Sometimes engage does. Sometimes empower grows from 1 to almost 2 bars before engage moves from one bar. Approaching 3 or greater bars they seem to converge. If running like a hybrid and the battery is low the empower display shows more bars than the engage display and vice versa if the battery is discharging or maintaining. Edited June 15, 2017 at 10:36 PM by openair Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.