tflondon Posted May 3, 2017 at 03:02 PM Report Share Posted May 3, 2017 at 03:02 PM On my way to work this morning it was 68 outside and when I turned on the AC and set it to 65 all I got was hot air, the only way I could get the AC to blow cold air was to turn it to LO. Even setting it to 60 the heat would come out full blast when on AUTO. Any ideas where I should look first, it is a 2014 Energi but have almost 50K miles so it is out of warranty. Thanks! My14Energi 1 Quote Link to comment Share on other sites More sharing options...
Russael Posted May 3, 2017 at 03:41 PM Report Share Posted May 3, 2017 at 03:41 PM Sounds to me like the internal temperature sensor may be on the fritz. If it does it again on the way home, you can try "rebooting" the car by removing the negative battery cable from the 12v in the trunk for a few minutes and reconnecting it. If that doesn't fix anything, dealership trip. Quote Link to comment Share on other sites More sharing options...
My14Energi Posted January 11, 2018 at 06:22 PM Report Share Posted January 11, 2018 at 06:22 PM Mine is now doing this, anyone find a solution? Quote Link to comment Share on other sites More sharing options...
My14Energi Posted January 12, 2018 at 05:34 PM Report Share Posted January 12, 2018 at 05:34 PM So i unclipped the panel underneath the steering column and the cabin temp sensor is to the right of the steering column. Holy cow was the little fan inside and the electronics covered in dust and fuzz. Quick spray with compressed air and problem is gone jj2me, bdginmo and jsamp 3 Quote Link to comment Share on other sites More sharing options...
profskule Posted January 31, 2018 at 01:23 AM Report Share Posted January 31, 2018 at 01:23 AM Same issue here, for a few hours. Just pull the Sync fuse, wait, and restart. Good as new. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.