josefontao Posted January 7, 2015 at 07:12 PM Report Share Posted January 7, 2015 at 07:12 PM Is theree any gauge, option, display, myfordmobile, etc, that would display gallons used during a trip on a 2015 model? Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted January 8, 2015 at 07:39 PM Report Share Posted January 8, 2015 at 07:39 PM Is theree any gauge, option, display, myfordmobile, etc, that would display gallons used during a trip on a 2015 model? Turn off the car, look at your trip summary. You can also reset Trip 1 or Trip 2. Those both track gas used. You must turn on the "Enhanced" or "Advanced" view to see that data though. I can't remember which is the correct term. Quote Link to comment Share on other sites More sharing options...
flyingcheesehead Posted January 9, 2015 at 01:26 AM Report Share Posted January 9, 2015 at 01:26 AM Is theree any gauge, option, display, myfordmobile, etc, that would display gallons used during a trip on a 2015 model? Go to MyFordMobile, click "My Driving" and then "Trip & Charge Log". While it doesn't directly tell you gallons used, you can calculated it from MPG and miles traveled: Miles / MPG = Gallons. Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted January 9, 2015 at 03:11 AM Report Share Posted January 9, 2015 at 03:11 AM Go to MyFordMobile, click "My Driving" and then "Trip & Charge Log". While it doesn't directly tell you gallons used, you can calculated it from MPG and miles traveled: Miles / MPG = Gallons.Doesn't MFM show MPGe though? It says MPG, but doesn't it show MPGe? Quote Link to comment Share on other sites More sharing options...
murphy Posted January 9, 2015 at 11:33 AM Report Share Posted January 9, 2015 at 11:33 AM (edited) Doesn't MFM show MPGe though? It says MPG, but doesn't it show MPGe?MFM shows MPGe, not MPG, for my 2013 Energi. Of course the dashboard in the car also shows MPGe. Edited January 9, 2015 at 11:35 AM by murphy Quote Link to comment Share on other sites More sharing options...
josefontao Posted January 9, 2015 at 05:11 PM Author Report Share Posted January 9, 2015 at 05:11 PM How do I turn on this enhanced or advanced view? I can't find the option. Quote Link to comment Share on other sites More sharing options...
Rhynri Posted January 12, 2015 at 03:34 PM Report Share Posted January 12, 2015 at 03:34 PM I was curious as well, I hadn't heard of this. Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted January 14, 2015 at 06:08 PM Report Share Posted January 14, 2015 at 06:08 PM Your owners manual will tell you. I believe you do it from the trip meter screen. Use the right arrow on the directional pad to navigate to the trip meter settings menu. Quote Link to comment Share on other sites More sharing options...
josefontao Posted January 15, 2015 at 05:27 PM Author Report Share Posted January 15, 2015 at 05:27 PM This option is not there on a 2015 FFE Quote Link to comment Share on other sites More sharing options...
Rexracer Posted January 16, 2015 at 12:13 AM Report Share Posted January 16, 2015 at 12:13 AM This option is not there on a 2015 FFE I'll trade you my 2013 for your 2015 so you can have the option... :happy feet: Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted January 16, 2015 at 03:24 PM Report Share Posted January 16, 2015 at 03:24 PM I'll trade you my 2013 for your 2015 so you can have the option... :happy feet:I wouldn't do that...you'd lose your Lifetime Summary then! ;) Rexracer 1 Quote Link to comment Share on other sites More sharing options...
josefontao Posted January 16, 2015 at 05:47 PM Author Report Share Posted January 16, 2015 at 05:47 PM LOL Quote Link to comment Share on other sites More sharing options...
Rhynri Posted January 16, 2015 at 10:40 PM Report Share Posted January 16, 2015 at 10:40 PM Does anyone know if the EV miles rolls over on the trip meter? Right now it says it took me 340ish kwh to drive 100ish miles. Which is either a glitch or the trip log rolled over to zero at some point. Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted January 17, 2015 at 12:46 AM Report Share Posted January 17, 2015 at 12:46 AM Does anyone know if the EV miles rolls over on the trip meter? Right now it says it took me 340ish kwh to drive 100ish miles. Which is either a glitch or the trip log rolled over to zero at some point. The trip meter doesn't show the thousands place for EV miles. Quote Link to comment Share on other sites More sharing options...
Rhynri Posted January 17, 2015 at 05:13 AM Report Share Posted January 17, 2015 at 05:13 AM (edited) Gotcha. Sorry for using "Rolled over". It's how we always referred to trucks (like my old trusty '82 Chevy 6.2 Diesel) that didn't have a 100,000s place on the odometer and went over 100,000 miles.That being said, wish they gave a place in car for lifetime numbers. Edited January 17, 2015 at 05:14 AM by Rhynri Quote Link to comment Share on other sites More sharing options...
dudley Posted February 12, 2015 at 03:16 AM Report Share Posted February 12, 2015 at 03:16 AM you can go into ( engineering test mode ) and look at total gals. used on trip A or B that's what I do when I fill up. Quote Link to comment Share on other sites More sharing options...
flyingcheesehead Posted February 12, 2015 at 06:42 PM Report Share Posted February 12, 2015 at 06:42 PM you can go into ( engineering test mode ) and look at total gals. used on trip A or B that's what I do when I fill up. How do you get into engineering test mode? Quote Link to comment Share on other sites More sharing options...
murphy Posted February 12, 2015 at 08:35 PM Report Share Posted February 12, 2015 at 08:35 PM How do you get into engineering test mode? Energi Engineering Test Mode Hold the left OK button and start the car.Watch the upper left corner of the left display for the letters ET to appear in yellow.After the letters appear release the OK button.Use the down arrow to scroll through the screens.Press and hold the OK button or shut the car off to exit engineering test mode. Timewellspent 1 Quote Link to comment Share on other sites More sharing options...
Rhynri Posted March 11, 2015 at 04:00 PM Report Share Posted March 11, 2015 at 04:00 PM It's nice it's so easy to get into Engineering Mode. Quote Link to comment Share on other sites More sharing options...
stevedebi Posted March 11, 2015 at 07:43 PM Report Share Posted March 11, 2015 at 07:43 PM It's nice it's so easy to get into Engineering Mode.The problem I have with ETM is that it cannot be accessed unless you have the car powered off, so it is pretty much useless for monitoring while driving. Of course, it wasn't desinged for the end user. Quote Link to comment Share on other sites More sharing options...
Rhynri Posted March 11, 2015 at 07:52 PM Report Share Posted March 11, 2015 at 07:52 PM The other side of that is that if you really need, it you can generally think of enabling it when you start. And then you don't have the extra information if you don't desire it. Quote Link to comment Share on other sites More sharing options...
stevedebi Posted March 11, 2015 at 11:35 PM Report Share Posted March 11, 2015 at 11:35 PM The other side of that is that if you really need, it you can generally think of enabling it when you start. And then you don't have the extra information if you don't desire it.Yes, but you also don't have access to the convenient information displays. At driving speeds, the graphical displays are better to use - a quick glance tells the story. With ETM you have to read the text. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.