KateFE Posted September 11, 2022 at 07:13 PM Report Share Posted September 11, 2022 at 07:13 PM I will be taking the car and charger in to be dealt with at the dealership, but I wanted to know if anyone else has run into an overheating issue with the vehicle charger? Quote Link to comment Share on other sites More sharing options...
theterminator93 Posted September 11, 2022 at 10:06 PM Report Share Posted September 11, 2022 at 10:06 PM I've seen that kind of thing before when arcing occurs inside the outlet (usually because there's a poor connection between the outlet and the accessory plug). Certainly get the EVSE looked at (I'd also recommend replaced - chances are the plug was/is now damaged), but I'd suspect the outlet itself had a part to play in that as well - it possibly it had a poor connection internally. The car will only pull up to 12A from a 120V outlet - under no circumstances should a sustained 12A done that to a normal GFCI outlet. cr08 and muzicman61 2 Quote Link to comment Share on other sites More sharing options...
muzicman61 Posted September 12, 2022 at 12:07 PM Report Share Posted September 12, 2022 at 12:07 PM I'd replace that GFCI outlet as soon as possible. You're lucky it didn't cause a fire. Quote Link to comment Share on other sites More sharing options...
jsamp Posted September 13, 2022 at 03:30 AM Report Share Posted September 13, 2022 at 03:30 AM Which charging cord do you have... the one with a white J1772 that plugs into the car, or a black J1772 plug? The white ones were recalled for potential to overheat at the wall plug and not detect it. The black ones have a thermistor inside the plug to sense oveheating. If you have a white one, get it replaced. There was a recall several years ago, but not sure if it would still net you a new cord for free. Ask your dealer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.