mrmikel

Are you operating your HVAC in Auto mode? If you try to tweak it manually, you could inadvertently be disabling all the logic which should prevent moisture from occurring.

Hello, and congrats on the new car. So, our cars don't have a standard transmission. We have a Continuously Variable Transmission or CVT. Our transmissions can't "slip", though it may seem or feel like it is, especially under hard acceleration. I have a 2013 Titanium Energi, and I have been noticing something similar to you, the loudness when the ICE kicks in. Almost seems like a hole in the exhaust system somewhere. Trying to avoid the dealership service dept if I can until I can pinpoint the symptoms a bit better.

I'm interested in this issue, too. I have a 2013 FFE and my wife has a 2013 Escape. Both will go dark when the ATT 2G cell system is dismantled. I wonder how much Ford will charge us for an upgrade, assuming one is coming.

I too recently acquired a 2013 FFE Titanium, minus nav and park assist. I did have nav added for $500 by Jason at www.fordpimods.com. And the previous owner of my car must have driven mostly on battery because the lifetime MPG was in the 80s. I immediately reset the lifetime so I can be more realistic with my driving. Good luck with the "new" ride!!

I can only see the last 2 trips in MFM. What am I missing?

I should add that I reset the lifetime mpge. What was there when I got the car was not reflectivec of me (it was in the 80s which is totally unrealistic for me). Now I enjoy watching the number go up as I continue to learn how to drive to maximize efficiency.

I'm talking about the cover over the camera. That plastc can get filmy, just like the windows can.

I'm no expert here, but have you thought of just taking a cotton cloth and wiping the camera lens on the back of the rear view mirrior and then also wiping the inside of the windshield on the inside where the camera is looking out? No idea if this even makes sense, but just thought I woud throw it out there. Sometimes its the simple solutions.

New Energi owner here, used 2013 model. Had it 5 weeks now. It's winter here and I can't expect miraculous numbers. And a lot of my trips are well beyond the electric-only range of the car. But by reading all the amazing, helpful tips here, I have started to figure out how to get the most out of the car. With my 2010 FFH, I eventually just started to drive it, and would get a kick out of seeing the MPG for each trip, when I remembered to look. I suspect I will get to the same place with this car eventually as well. Until then, I'm having a blast learnng all the technology on this car.

I sent them an email to inquire about that. Here is their response: Hello Mike, Currently, we are only conditioning NIMH batteries…and there are a few reasons why: · Capacity can be added to NIMH batteries…capacity CAN NOT be added to lithium…at least with today’s technology. · Most vehicles with lithium batteries likely have 5 years + left in their manufacturer’s warranty · We think that in the next 5 years, technology will provide the solution to the lithium capacity element…our tech team is already working on it

On this and other hybrid forums, the topic of battery replacement invariably comes up. Most likely none of us will ever have a problem with our batteries, but if we do, what options do we have? Purchase a new battery at a high cost. Purchase a used battery and take your chances. But what about The Hybrid Shop (www.thehybridshop.com)? If our capacity really tails off, will the service they perform really make a difference? Just curious what everyone thinks, thanks!!

Gas prices won't always be this low. Something will happen and we will be paying $3.00+ per gallon. Then this car will be in high demand.

Yes, I have the settings correct. But when I get into the started car, the heated seats show as not turned on. Perhaps they ARE on the low setting, and the MFT just doesn't display them as on?? I will have to pay attention to the seats next time to see if they ARE on but just not showing as on. Such fun!

It's been really cold here lately, so I have been using my remote start. From what I have been reading, the heated seats should be turning on when I do a remote start. But they are not. What am I missing?

Welcome to the forum! I just traded a 2010 Ford Fusion Hybrid (FFH) for a 2013 Ford Fusion Energi (FFE) Titanium. Used, 1 owner, low miles. Still trying to figure out how to maximize battery life - lots of thread son that here. Good luck!